Nearly all of the time, companies would spend a lot of money to purchase their lift trucks. It is vital, therefore to take proper care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures that are undertaken in taking care of and maintaining this machine.
Amongst the best ways to tell how good the engine is performing is by starting the forklift up and listening closely to see how it works. For instance, if there are any knocks or misses, the machinery is defective and this should raise several concerns. Moreover listen carefully for any squealing noise which come from the belts since these sounds would provide you with a wealth of information.
When carrying out maintenance, some of the main parts you would need to pay attention to consist of the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components have to be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
After the above parts have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every cell of the battery should be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters should be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Next, inspect every other component of the equipment like the wheels. If any type of issue or fault is detected, be certain to deal with it immediately so as to make certain the machine is running at its safest and optimum levels.