Tower Crane Rentals and Sales Saskatchewan - Cranes are a globally recognized form of industrial equipment that is commonly used in the materials handling industry. These machines may be outfitted with sheaves, a hoist rope, wire ropes or chains. These products allow cranes to hoist materials vertically and transport them horizontally. Cranes make transporting cumbersome loads including machinery, shipping containers and crates much easier.
Freight Transportation
Cranes can lift difficult loads to make unloading and loading safer and more efficient. The lifting capacity depends on the model. Cranes deliver a major mechanical advantage, allowing people to lift tremendous amounts of freight. Cranes are commonly found on construction sites and a variety of industries.
Specified Use
There are different cranes for many applications. Jib cranes can be used for tighter environments including workshops. Extensive tower cranes can be seen in construction. There are numerous cranes suited for many different jobs. Tight spaces may be more accessible with the use of cranes. Floating cranes can be useful for salvaging sunken ships and other marine items. They may also be used on oil rigs.
Tower Cranes
The type of crane that is fixed on a concrete slab is a tower crane. This unit is often seen mounted to sides of structures to provide superior lifting and height. These cranes are used in residential and commercial construction. The base is mounted to the mast which can create further reach by extension. The crane is capable of rotating thanks to the mast that connects to the slewing unit. The long horizontal jib, the shorter counter-jib and the operator’s cab are all found above the slewing portion.
The majority of the load is carried via the long horizontal jib. The counter-jib creates the counterweight and it may rely on concrete blocks. The jib houses the crane’s load to and from the center. Typically, the operator is found inside of a cab located on top of the tower that is attached to the turntable; however, it can be mounted on the jib alternatively. The operator may rely on a radio remote control apparatus from the ground. The crane operator uses electric motors to operate the lifting hook and control wire rope cables within a system of sheaves. The cargo hook, along with its motor is found in the long horizontal arm. The operator often works with a rigger to coordinate hooking and unhooking loads. Daily safety requires many important hand signals. The rigger has an important job dictating the crane’s lifting schedule. They are responsible for making sure all rigging is reliable and safe.
Truck-Mounted Cranes
The boom and the carrier are two parts found on truck-mounted cranes. These two items have a turntable to attach them, allowing the higher portion the ability to swing from side-to-side. Typically, modern hydraulic truck cranes feature single engines. The engine supplies power to both the undercarriage and the crane. Hydraulics are responsible for providing power to the upper via the turntable from the pump mounted on the lower portion. Back in the day, older models of hydraulic crane trucks often had two engines. One engine allowed the crane to be pulled down the road while the other engine controlled the hydraulic pump for the jacks and outriggers. There are operators who would rather run the older two-engine models due to the frequent turntable leaks that often occur in some of the newer designs.
You may have witnessed cranes traveling on roads to travel from site to site. This can eliminate the need for industrial transportation requirements unless the crane is of sizeable weight with size restrictions. Transportation falls under local laws. Generally, bigger cranes have trailers to help the load become distributed over many axles. There are some crane models that can be taken apart to accommodate particular requirements. Often an additional truck will follow the crane. The truck has the counterweights that have been disassembled for travel.
Outriggers & Stability
Outriggers are extended horizontally from the chassis of the crane. The outriggers help to vertically stabilize the machine and keep it level during stationary and hoisting jobs. Specific crane truck models can slowly travel with a suspended load. Care is given to ensure the load doesn’t swing during travel. The stiffness of the chassis suspension delivers most of the anti-tipping aspect. Moving counterweights are included in a variety of models to amplify stabilization further than what the outriggers offer. Suspended loads are among the most stable due to the majority of the crane’s weight acting as a counterweight. There are electronic safeguards in place to regulate the maximum safe loads for traveling speeds and stationary work.
Overhead and Bridge Cranes
A bridge crane is a type of overhead crane. This mechanism features a crane with a hook-and-line mechanism and horizontal beam that is designed to run along rails that are spaced widely. These cranes are similar to a gantry crane and are often found in long factory buildings and attach to rails that run down two long walls. Cranes can be made with single or double beam construction and may rely on complex box girders or regular steel beams. Certain overhead cranes have the ability to use a control pendant for operation. A double girder bridge can be used in places that require heavy lifting such as 10 tons or more. The box girder style produces a system with a lower deadweight but offers higher system integrity. The hoist is another item that is utilized to lift the cargo, the bridge spanning the portion covered by the crane and a trolley to move along the bridge.
The manufacturing process of the steel industry utilizes cranes frequently. Steel is typically handled by an overhead crane until it is transformed into a finished piece and leaves the factory. All steel is handled by an overhead crane from raw materials being poured to storing hot steel for cooling and transporting finished coils. Steel components are loaded by overhead crane and lifted onto trucks. Metal stampers and fabricators rely on this equipment daily as does the automobile industry to handle raw materials.
Pulp & Paper Mills
Bridge cranes are often relied on for regular pulp mill maintenance including removing equipment such as heavy press rolls. Bridge cranes utilized in paper machine construction help to install large apparatus’ and equipment including huge components such as cast-iron paper drying drums and similar items.
Loader Crane
Powered electrically with an articulated arm attached to a truck or trailer, specific for loading and unloading, the loader crane has numerous joints to allow the machine to be folded into a small space between uses. Telescoping sections are popular. There are models that have the ability to stow or load themselves without any operator instruction. The operator needs to move around the vehicle for viewing access to the load. Modern models may rely on a radio-linked system or a portable cabled control system that works alongside hydraulic controls that are mounted on the crane.
Gantry Crane
There is a hoist on the gantry crane found in a fixed machinery house or a horizontal trolley that runs along rails often fitted between two beams or a single beam. The gantry system supports the crane frame with equalized beams. Wheels are running along the gantry rail, typically perpendicular to the direction the trolley travels. The gantry cranes are available in numerous sizes. Some models can move extremely heavy loads for industrial and shipyard applications.
Tower Cranes PDF
